Single Swinging Cooler Door
Ideal Traffic
- All Traffic - Impact
- Swinging Door - Double Acting
Overview
- Single Panel - Left or Right Hinge
- 3-3/4″ Overall Panel Thickness
- CFC-Free Urethane Core Rated to -40°F
- Triple-Pane Gas-Filled Windows Standard
- Thermally Broken Spine
- DOE Compliant / NSF Certified
Ideal For
- Cooler/Freezer Storage
- Supermarket
- Food Processing
- Food Service
- Retail
Features
Door Panel
- 1/8″ high-density rotationally molded polyethylene outer shell over a foamed-in-place CFC-Free urethane core, with an overall panel thickness of 3-3/4″. The foamed-in-place core insulates 30% to 40% better than styrene and retains its properties to -40°F.
- Aluminum back spine, powder coated black, with an integral gasket retainer
- Replaceable bottom edge gasket set into a molded-in aluminum keyway
- 3/4″ radius leading edge and ABS top cap
Windows
- Triple-pane gas-filled polycarbonate glazing with a black ABS frame, standard on every door
- Four sizes: 8″ x 30″, 10″ x 30″, 12″ x 18″ and 16″ x 16″
- Available sizes follow panel width - a 24″ to 27″ panel takes the 8″ x 30″; 27″ to 30″ adds the 10″ x 30″ and 12″ x 18″; 30″ and wider takes all four
- 8″ x 30″ and 10″ x 30″ are ADA approved
- Standard glazing height is 59″ from finished floor and ADA height is 40″, unless specified otherwise at the time of order
Hinge
- Full composite hinge system with hinge seal and a 1″ solid aluminum hinge post mounting into the aluminum back spine
- Double-acting cam hinge with a permanently lubricated needle bearing roller assembly
- Optional hold-open cam and stainless steel roller bearing
- Aluminum or stainless steel lower hinge guard
Single Door Configuration
- Hinge side specified left or right at the time of order
- Sized to your finished opening - width and height specified at order
- Steel jamb or wood jamb fasteners
- 3-1/2″ minimum wall thickness
Options
- Window Size and Location
- Impact / Kick Plates - Stainless Steel or Polyethylene
- Teardrop Bumpers
- Slide-Track Bumpers
- Polyethylene Spring Bumper
- Custom Door Colors
- Aluminum Cart Guard - 32″ from Finished Floor Standard
- Push Plate - ABS or Stainless Steel, 4″ x 16″ or Custom
- Pull Handle - Stainless Steel Only
- Stainless Steel Lower Hinge Guard
- Stainless Steel Roller Bearing
Colors




